Configuration for AMS 6500
Protection Monitors
Pre-configured user-selectable measurement types simplify software configuration
Password protected with 4 user login levels for customized access
Context-sensitive help messages address setup questions quickly
Includes trend, time function, order analysis and startup/coast down data for comprehensive setup.
Configuration includes setup for basic prediction capabilities, including troubleshooting and diagnostics
Application

The AMS 6500 configuration software for machinery protection allows you to configure protection modules, view real-time vibration monitor system and sensor health.

The intuitive configuration process starts by selecting a card type. Next, the configuration software presents a simple tabular view with all configuration settings visible. Tabs help you sort information between inputs, outputs, advanced machine diagnostics and administrative tasks. Permissible ranges are visible for every required entry to help you understand the bounds of parameters. Preset parameters are automatically loaded when Emerson sensors and convertors are used.

Real-time data can be displayed during system configuration to verify that wiring, card settings, and instrumentation are healthy and configured properly. Real-time information such as gap voltages, waveform data, and overall vibration data are viewable.

On-going maintenance functions, such as resetting latching relays or loading a saved configuration, can be easily performed from the software. The software can run on PCs or laptops.With the system configuration software, the following monitors of the A6000 family can be configured:

A6110, A6120, A6125, A6140, A6150, A6151, A6210, A6220, A6310, A6312, A6312-8, A6410, A6620, A6630, A6740, A6740-10, A6824, A6824R

Basic Prediction Capabilities

The AMS 6500 configuration software has built-in capabilities for some trends that allow basic troubleshooting and prediction of the machinery. The main value trend shows a graphical representation along with card health and alarm values. The software displays the time function of the vibration signal, the FFT analysis date with up to 400 lines resolution and the FFT phase data. The software also displays the last startup or coast down of the machine. The configuration software visualizes the data and shows speed over time and vibration over speed for each channel.

Configuration Software

The configuration kit contains the following parts:

CD-ROM with AMS 6500 protection module configuration

Installation instructions

Configuration cable, 2m, with a 9-pole sub-D plug and a 6-pole mini DIN diode plug for connecting to AMS 6500

protection monitors

DV-adapter 9-pole SUB D on 25-pole SUB D type AB914F

Two adapter cables with SMB-coax plugs on both sides for the connection of an oscilloscope to the AMS 6500 protection monitors, length 3m, 296-201-794 by Radiall

Two adapters BNC/SMB R191 209 by Radiall„ USB to RS232 adapter

System Requirements

To load the programs, a PC or laptop must meet the following minimal prerequisites:

Standard PC/Laptop with Pentium II or better, minimum clock frequency 500 MHz, CD-ROM, RS232 interface port (or USB when used with external USB to RS232 convertor)

Operating system: Windows 2000, Windows XP, Windows

Vista or Windows 7

Order Number:

A6910-KIT: Includes software CD, cables, and adapters

A6910: Includes software CD only
Related product recommendations:
EMERSON A6110
EMERSON A6120 9199-00002
EMERSON A6312/06
EMERSON A6110 9199-00001
PARKER ZETA6104
ABB TVOC-2-240 1SFA664001R1001
ABB 216EA62 1MRB150083R1/F 
EMERSON A6740 Relay
EMERSON A6824R 9199-00098-13
EMERSON A6210
EMERSON A6824 9199-00090
ABB 216EA61b
EMERSON A6500-RC
GE 104X905BA603
EMERSON A6140 9199-00058
EMERSON A6220
EMERSON A6370D 
EMERSON A6410 9199-00005
ABB IRB4600 Gearbox 3HAC031074-004ABB
ABB HESG447440R1 DCS MODULE 
ABB GKWE857900R1210
ABB HIEE300043R1 ALA334 A01
ABB 3HAC040657-002
ABB 81AA10E
ABB 6CC3HNP02588-1
More…